BS1139 Scaffolding Pipe Type 4 Weight

BS1139 Scaffolding Pipe Type 3 Weight

21 FT Scaffold Tube Size and Weight

6m (20 ft) Scaffold Tube Size and Weight

2.4mm Scaffolding Pipe Size & Weight 

2.2mm Scaffolding Pipe Size and Weight

2.0mm Scaffolding Pipes Size and Weight

1.8mm Scaffolding Pipe Size & Weight

2.5mm and 2.7mm Scaffold Tube Weight

OD42.7 mm Scaffold Steel Pipe

M.S Black Scaffold Steel Black Tube Weight

OD60mm Steel Scaffolding Pipe Weight 

Product Detail:

Sizes/dimensions we can supply: 

Scaffolding props are adjustable support posts under formwork. It carries loads in concrete slabs, beams, columns, and walls. The scaffolding props are composites of inner tubes, outer tubes, top and bottom plates, props sleeves with treads, robust prop nuts, lock pins, etc.

Scaffolding prop is also called prop jacks, steel props, shoring props, formwork props, construction props, shuttering props, building props, steel support, post shore, etc.

All scaffolding props are adjustable with closed heights and open heights. Thus another word for scaffolding props is a telescopic prop or adjustable prop. If the scaffolding props are made of steel tubular structure, it is also called adjustable steel props.

Adjustable Scaffolding Steel Prop Types Available

Steel Prop is a type of structural support for buildings in construction project, it is a type of adjustable vertical pipe support, customer can adjust the length by insert high tensile steel pin in a slot in the outer section and inner section. It also has a roled thread section for adjustable nut to make the structure more tight and safe. A piece of steel prop has internal tube, external tube, prop nut, base plate and top plate. Here is the widely used paremeters.

Spanish Type Prop

Italian Type Prop

Middle East or  German Type Prop (Heavy Duty Prop)

PUSH-PULL PROP

Scaffolding Steel Prop Application

The steel prop is widely used in the construction and DIY industries for the temporary support of ceilings, trenches, and walls. It can be used in the interior building construction project. 

Description of  Q235 steel ladder frame scaffolding:

1. One set of  ladder frame scaffolding consists of 2 pcs of main frames, 2 pairs of cross brace, and 4 pcs of joint pins.

2. CO2 arc welded painted ladder frame scaffolding is strong and durable for heavy concrete slab supporting or outside wall painting and decoration.

3. The high  protective powder coated technique can protect  ladder frame scaffolding from rust and corrosion in both inside and outside surface of the tube, which makes its life span longer than 3-5 years.

4. Poly functional ladder frame scaffolding can be used for both interior and exterior building construction if  equiped with different accessories. Such as, caster wheel, jack base, u head, and etc.

1. Design: Step ladder with hook make it easy to assemble and using.

2. Material: Our step ladder use new carbon steel material, Make it have high tensile nature.

3. Surface Finishing: Hot Dip Galvanized process can promise our ladder 10 years safety using.

4. Welding Procedure: Advanced CO2 shielding gas welding design，assuring construction safety.

5. Anti-skid Treatment: Well drainage and anti-skid step guarantee a safe platform work.

6. Standard step ladder, a necessary & fast construction equipment for scaffolding structure.

7. Energy-saving and environment-friendly.

Standard: BS1139/EN12811

Material: Q195

Surface Treatment: Pre-Galvanized

Scaffold steel plank is an important part of the scaffolding. It is used as a walkway steel plank in the scaffolding system for construction safety.

The use of steel scaffold plank avoids the disadvantage of heavy water absorption and extreme slippery caused by rain on wooden scaffold planks.

The scaffold steel plank is connected with CO2 arc welding to against cracking and deformation, which to provide corrosion and rust resistance.

It is lightweight and high strength, easy to erect, and highly reusable. Both galvanized and ungalvanized you can choose depends on your needs.

The scaffold steel plank is made up of Q195~Q235 steel as raw material and is widely used in all kinds of scaffolding systems.

Product Specification

Product Features

1. Scaffolding steel plank is used to walk through the scaffolding system or elevate the step on the scaffolding.

2. Steel scaffolding plank is pre-galvanized and welded with CO2 arc which  provide longer protection from deformation, rustiness and corrosion.

3. Can choose different sizes and support types according to market or customer requirements

4. Light weight and strong carrying capacity.

5. Reinforcing rib design, strengthening the load capacity of the steel plank, patented hole design,

reducing the weight and ensuring good drainage.

6. Long service life, can be used for more than 5 years.

Material: Q235

Size: M30/32/34/38*400/600/660/760mm or as your request

Variety Scaffolding Base Jack, U jack for choice 

Surface Treatment: Painted, Powder Painted, Electro-galvanized, Hot Dip Galvanized

Product Specification of Scaffolding Base Jack

Product Features of Scaffolding Base Jack 

1. Simple structures, simple erectionimple structures

2. High efficiency with strong loading capacity

3. With galvanized surface(endurable)

Product Show

Catwalk is a narrow path, raised above the ground, often built for walkers to walk on outside a building that is built or repaired. 

Catwalks are made of galvanized steel strips, which have high corrosion resistance, and are set with mid-supports every 500mm, greatly strengthens the pressure-bearing capacity of the catwalks. Hunan World Scaffolding catwalks have different widths, thicknesses, heights, and lengths for selection.

Product Specification of Frame Scaffolding Catwalks:

other sizes are available on request.

Product Show

Kwikstage Scaffolding is one of the widest used scaffolding systems, mainly reliable in Australia for its flexibility, strength and ease of installation.

This scaffolding system saves erection and dismantling time, reducing labour costs and creating time for what matters most – getting the job done!

Kwikstage Scaffolding Advantages:

1. Durability: Kwikstage scaffolding is made of tough material and provides long-term benefits.

2. Adaptability: Kwikstage scaffolding is adaptable to different construction sites and all types of buildings.

3. Increased productivity: This scaffolding can sustain a lot of workers at the same time, thereby increasing productivity.

4. Lower maintenance costs: It does not require costly maintenance.

5. No loose fittings: The wedgelock system without any screws or nuts.

6. Labor saving: An excellent feature of this scaffold is that it can be erected and dismantled easily and fast.

Ringlock Scaffolding are mainly composed by Standard, Ledger, Diagonal Brace, Base Collar, Joint Pin. Accessories have Staircase, Catwalk, Triangle Bracket, Heavy Truss, Reinforced Brace, Transom, Jack Base, U Jack etc, ringlock scaffolding usually have two usages, one is used as inner support of construction, another is erected as the out plateform for workers working.

Our ringlock scaffolding include M48, M60 two specifications with vary sizes, could meet your different demands, using high quality Q345, Q235 steel as raw material. The surface are hot dip galvanized,with high corrosion resistance, our ringlock scaffolding service life could reach 15 years.

Ringlock scaffolding has been one of the most widely used scaffolding system because of its light, stable, safety structure and long service life, are greatly used in building construction, stage construction, railway construction, airport construction, etc.

Ringlock Standards as the main part of ringlock scaffolding, are made by Q345 steel material, connected by joint pins, our ringlock standards have two out diameter 48.3mm(M48) and 60.3mm(M60) for your choice. Length have 500mm, 1000mm, 1500mm, 2000mm, 2500mm, 3000mm and so on, could meet your different height demand, and have 3.0mm, 3.2mm, 3.25mm such thickness, could satisfy diffenent projects requirement.

Our Ringlock Ledgers have two material for your choose, Q235 and Q345. If your projects require high, you could choose Q345 for ledgers, if your projects are normal, Q235’s ledgers could meet your project demand. Also our ringlock legers have 300mm, 600mm, 900mm, 1200mm such lengths and 2.5mm, 2.75mm, 3.0mm, 3.2mm etc  thickness for your choice.

Diagonal Braces are used for bracing of Ringlock scaffolding, so as to make the scaffolding more stable. Our ringlock diagonal braces also have hot dip galvanized surface treatment and use Q235 as raw material, if you want Q345 ones, we also could prodcue for you. The ringlock diagonal braces lengths usually are 680mm, 900mm, 1200mm, 1400mm, 1570mm, 2070mm, 2570mm,  3070mm, and thickness usually are 2.5mm, 2.75mm.

In Ringlock, base collars are designed to sitting on top of the screw jack creating a lower node point.Our ringlock base collars use Q345 steel as raw material and hot dip galvanized surface treatment, very high quality.